• Italiano
  • English

Product by Market

The correct adhesive searching through our experiences in different industrial sectors.

gelset 44

CA 44 – GEL

Read More

Cyanoacrylate Adhesive thixotropic gel, suitable for the bonding of surfaces such as skin. Viscosity: 50,000 cps MK CA 44

DEGRASANT MK 1001

Read More

MK 1001 is a product used as degreasing and adhesion promoter for adhesive based on polyurethane -sylan MK 1001 can be used on substrates before adhesive such as: PUR. MS MK_1001_ENG

isr 7005

ISR 70-05

Read More

MS adhesive with a tensile force and a green strength among the highest. Certification IMO – Resistance to fire SCHEDA TECNICA

7008

ISR 70-08

Read More

MS sealant adhesive for glass, windows and windscreens. Conforms to FMVSS 212 SCHEDA TECNICA

MASTIKPLEXX 1000

MASTIKPLEXX 1000

Read More

Mastikplexx 1000 is a structural two component methacrylate adhesive, designed for the high bonding strength of the metal and composite materials.   Bonding metal fasteners for composite molded parts. Bonding aluminum and stainless steel...

MASTIKPLEXX 1050

MASTIKPLEXX 1050

Read More

MASTIKPLEXX 1050 is a structural two components methacrylate adhesive, designed for the high strenght bonding of the metal and composite materials. Bonding metal fasteners for composite molded parts. Bonding aluminum and stainless steel letters,...

MASTIKPLEXX 1100

MASTIKPLEXX 1100

Read More

MASTIKPLEXX 1100 is a structural two components methacrylate adhesive, designed for the high strength bonding of the metal and composite materials. Bonding metal fasteners for composite molded parts. Bonding aluminum and stainless steel letters,...

MASTIKPLEXX 4000b

MASTIKPLEXX 4000

Read More

MASTIKPLEXX 4000 is two component methacrylate adhesive,  structural  and designed for low energy plastics bonding with no surface preparation. RECOMMENDED SUBSTRATES: Polypropylene (PP) Polyethylene (PE) Polystyrene (PS) Polyethylene terephthalate...

MK 0130

MK 0130

Read More

MK 0130 is a single component polyurethane sealant of high viscosity which cures with exposure to moisture air. From this reaction, the product changes from mellow to a state of elastomer with high tensile strength and aging properties. MK 0130 is...

MASTIK 1400 N

MK 1400 N

Read More

Solvent based polychloroprene contact adhesive suitable for bonding leather, wood, metal, rubber.. Higher dry content of the standard solvent based resistant to moisture >90% Resistant temperature: 100 ° C     MK_1400N_ENG...

MASTIK 1520 N

MK 1520 N

Read More

Solvent based polyurethane adhesive studied particularly for bonding synthetic materials including: PVC Natural rubber, SBR Texile-nautical Used with the second component Fixdur allows a high hydrolysis resistance and good resistance to heating....

MK 2011B

MK 2011

Read More

Solvent based adhesive universal MK 2011 polychloroprene contact adhesive with low viscosity for use in spray or brush. Suitable for bonding porous foam, polyurethane foam, leather, textiles and the like. of metal in general, wood, concrete,...

MK 2639

MK 2639

Read More

MK 2639 is a single component polyurethane sealant. Polymerizes rapidly on contact with atmospheric moisture. Once cured, the product is highly elastic and can be painted. CONSTRUCTION: sealing joints subject to expansion or not. Sealant joints in...

MK 3353

MK 3353

Read More

Adhesive clear with low viscosity, available for bonding a wide range of substrates including roofing systems flat, expanded materials loaded and aluminum. As a result of its excellent oil resistance and suitable for bonding of flexible PVC. Very...

MK 442

MK 442

Read More

MK 442 is a single component polyurethane sealant. Polymerizes rapidly on contact with atmospheric moisture. Once cured, the product is highly elastic and can be painted. CONSTRUCTION: sealing joints subject to expansion or not. Sealant joints in...

MK 7222

MK 7222

Read More

MK 7222 is a single component anaerobic product suitable for brake nuts and bolts and other threaded parts against loosening caused by vibration. The product cures spontaneously when confined in the absence of air inside of metal surfaces with...

MK 7243

MK 7243

Read More

MK 7243 is a single component product suitable for threaded metal parts against loosening from shock and vibrations. Products cures spontaneously and rapidly when confined in absence of air between close fitting metal surfaces with small gap fill....

MK 7270

MK 7270

Read More

MK 7270 is a single component product suitable for threaded metal parts against loosening from shock and vibrations. Products cures spontaneously and rapidly when confined in absence of air between close fitting metal surfaces with small gap fill....

no thumbnail

MK 7316

Read More

MK 7316 is a anaerobic product single-component suitable for thread sealant and flat parts such as casings, flanges and pump housings. It replaces the conventional gaskets. Especially suitable for chrome, nickel-plated stainless steel. Not suitable...

MK 9810

MK 9810 N

Read More

Solvent-free Hot melt adhesive extrudable in hot Temperature. PUR reactive. Suitable for bonding wood, textiles, leather and plastics such as PVC – ABS.. In the automotive market, assembly of components, metal parts, glass, and when you...

MK CA 01

MK CA 01

Read More

Cyanoacrylate Adhesive high viscosity for bonding porous substrates Viscosity: 1500 cps MK CA 01

MK CA 01

MK CA 200

Read More

Cyanoacrylate adhesive based, suitable for bonding a wide variety of materials such as wood, paper, cardboard, leather, fabrics, etc..   The time of bonding depends on the substrates, High Temperature resistance : 137 ° C MK CA...

MK CA 20

MK CA 20

Read More

Cyanoacrylate adhesive for general bonding   Very fast fix time MK CA 20 ENG

MK CA 41

MK CA 41

Read More

Cyanoacrylate Adhesive Universal type with capacity for bonding many substrates such as:   Paper Wood Fabrics MK CA 41 ENG

MK CA 01

MK CA 46

Read More

This cyanoacrylate adhesive is suitable for applications where it is necessary that there are no effects of halos, also has a low odor and does not release fumes.       Low Odor. Anti Alone. Viscosity: 50...

MK CA 60

MK CA 60

Read More

Cyanoacrilate suitable for bonding a wide range of difficult products such as: Plastic Elastomers       Withstands temperatures up to 120 ° C Viscosity: 20 cps MK CA 60...

RESINE EPOSSIDICHE EP 500

MK EP 500

Read More

MK EP 500 is a two parts component low odour and clear with a long open time of 90 min     POT LIFE: 120 – 150 minutes FIX TIME : 3 hours MIX RATIO: 1:1 MK EP500 ENG  

EP 500 R

MK EP 500R

Read More

Two component Epoxy adhesive suitable for bonding: Metals Rigid plastics Marble, ceramic, porcelain, models Stones jewelery Glass, ferrite Colour: Transparant Mixing ratio: 1:1 Viscosity: 6000-13000 mPas   Open time: 1-2 min. at 20 ° C Setting...

MK EP 600UN

Read More

MK EP 600UN is a two parts component epoxy system with a long open time. It’s a viscous adhesive that is usually supplied in bulks packaging and is designed to mix in a ratio of 1-1 by volume through easy hands mixing.     Good...

MK HS301

MK HS 301

Read More

One component MS polymer adhesive of high quality, high tack and high strength.         Particularly suitable for bonding: Corner profiles in aluminum Side panels on buses / trains Metal joints where required a high initial...

MK HS302

MK HS 302

Read More

One component MS polymer adhesive of high quality. Particularly suitable for:         Elastic bonding and sealing in eg bus, caravans, trucks and trains Bonding ceilings of buses, trucks and trains Bonding-floor systems ISEGA...

MK HS303

MK HS 303

Read More

Single-component adhesive with high quality. Particularly suitable for bonding:         Sealing and bonding elastic structures bus, caravan, train and truck. Bonding and sealing roofs Bonding ceilings of trains, buses, trucks....

MK HS306

MK HS 306

Read More

High quality single component adhesive for spray application.       Particularly suitable for bonding: sealing of joints of sheets welded on horizontal surfaces sealing of junctions and overlapping parts tight sealing of joints...

MK HS355FC

MK HS 355 FC

Read More

MK HS 355 FC is a MS polymer adhesive of high quality developed for the bonding of crystals, glass and windscreen. Very high green strength, is revealed as a very thick paste with a very high resistance to failure.     This product...

MK HS460FC

MK HS 460 FC

Read More

High-quality MS polymer adhesive developed for windscreen bonding.       High Tensile and fast curing Packaging: 600 ml – Bulks Color: Black Mastikol 460 FC Eng...

MK HS FIRESEALER 335

Read More

Flame retardant component adhesive particularly suitable for use in the marine industry,       uses: Sealing of expansion joints. Sealing for bulkheads, wall and ceiling coverings. Universal adhesive for metal, concrete, wood, etc.....

MK MSP5

MK MSP5

Read More

Single-component adhesive with high quality. Particularly suitable for bonding flooring and parquet.   MK MSP5

MK SPRAY-BOND is a synthetic spray adhesive

MK SPRAY-BOND

Read More

MK SPRAY-BOND is a synthetic spray adhesive, designed for temporary bonding applications. It is a spray adhesive suitable for the positioning of the fabrics in the processing in Pre-preg, resin infusion, RTM. Particularly suitable for positioning...

hot melts

MK STICK NERO

Read More

Operating temperature: 180 ° – 200 ° C Open time: 20-25 seconds Time tack : 5 sec Viscosity: 6000 mPa.s Diameter: 12 mm. MK_STICK_NERO_ENG

hot melts

MK STICK PLASTIFICATO

Read More

Operating temperature: 180 ° – 200 ° C Open time: 20-25 seconds Time tack: 7 sec. Viscosity: 6500 mPa.s Diameter: 12 mm. MK_STICK_PLASTIFICATO_ENG

hot melts

MK TRASPARENT STICK

Read More

Operating temperature: 180 ° – 200 ° C Open time: 20-25 seconds Time tack: 5 sec. Viscosity: 5000 mPa.s Diameter: 12 mm. MK_STICK_TRASPARENTE_ENG

sg range MMA

PPX5

Read More

PPX 5 bond low surface energy plastics such as polypropylene (PP), Polyethylene (PE) and other thermoplastic olefin (TPO), commonly known as polyolefins.     PPX 5 can paste these surfaces without treatment. The wide use of the plastic...

hot melt psa

PRESSURE SENSITIVE 2465/04

Read More

Hot melt adhesive, 100% of solid content based on synthetic polymers and modified resins, intended to ‘bonding different substrates: tissues, TNT – PP film, PE where it is required high tack and high cohesion. The low-odor resins and...

hot melt psa

PRESSURE SENSITIVE 440/2

Read More

hot melt adhesive 100% of solid content based on synthetic polymers and modified resins, excellent for bonding substrates which require good heat resistance.       Form: Pillows Color: Yellow Viscosity: 16000 mPas Ring & Ball:...

PRIMER MK 2001

Read More

Primer MK 2001 is used as an adhesion promoter on the various substrates, including: Aluminum. Plastics. Glass. Color: Black MK_2001_ENG

3M - adesivi e nastri per l'industria, Industria Aftermarket Automotive, Industria Componenti, Industria Trasporti

PRODUCTS 3M

Read More

3M PRODUCTS The world leader in adhesive tapes, double sided adhesive, epoxy resins and automotive products. SPRAY ADHESIVE Range of spray adhesives specifically designed for industrial applications and for multiple bonding clean; through the...

PU2KE230

PU 2KE 230

Read More

PU2KE230 is a elastic two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for semi-structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete,...

PU2KE85

PU 2KE 85

Read More

PU2K85 is flexible  two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for semi-structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete,...

PU2KE87

PU 2KE 87

Read More

PU2K87 is a elastic two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for semi- structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete,...

PU2KE06b

PU 2KE06

Read More

PU2KE06 is a two-component elastic adhesive based on polyurethane, thixotropic, odorless, black or natural, which cures at room temperature for semi-structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete,...

PU2KR04b

PU 2KR 04

Read More

PU2KR04 is a rigid two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete, wood...

PU2KR05

PU 2KR 05

Read More

PU2KR05 is a rigid two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete, wood...

PU2KR07

PU 2KR 07

Read More

PU2KR07 is a rigid two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete, wood...

PU2KR12b

PU 2KR 12

Read More

PU2KR12 is a rigid two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete, wood...

PU2KR16

PU 2KR16

Read More

PU2KR16 is a rigid two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete, wood...

PU2HK-N

PU2HK-N

Read More

PU2HK-N is a two-component polyurethane adhesive that when cured creates a joint extremely strong and tough. This feature makes the adhesive PU2HK N-suited for difficult bonding and load-bearing structures.   High temperature resistance...

PU2HKN-FAST

Read More

PU2HKN-FAST is a two-component polyurethane adhesive that when cured creates a joint extremely strong and tough. This feature makes the adhesive suited for difficult bonding and load-bearing structures. High temperature resistance > 100°C...

PU2HKN-SL

Read More

PU 2HK-N SL Flexible, low viscosity polyurethane system suitable for the encapsulation and casting of electrical and electronic components, transformers, filters, capacitors. This system can be cured at room temperature, and is free from solvents....

sg range MMA

SERIE SG 100

Read More

Bright white, high performance adhesive with a combination of high tensile strength, high modulus and elongation for bonding a range of primed metals, composites and thermoplastics.     Color: Bright white nautical UV-resistant Tensile...

sg range

SERIE SG 200

Read More

High performance adhesive with a balance of strength and toughness for bonding a range of thermoset composites and thermoplastics.     Colour: Whitish Tensile strength: 14-17 MPa Shear strength: 16-19 MPa Working time SG 200-10 Open Time:...

incollaggio scafo - ragno strutturale

SERIE SG 230 HV

Read More

High viscosity adhesive with a balance of strength and toughness for bonding a wide range of substrates with little to no surface preparation. Approved naval sector Lloyd’s Register no. MATS/4154/2, ABS American Bureau of Shipping,  for...

sg range MMA

SERIE SG 300

Read More

Approved naval sector Lloyd’s Register no. MATS/4739/1, ABS American Bureau of Shipping, for bonding composite laminates, thermoplastics, metals, etc.. High performance adhesive with a balance of strength and toughness for bonding a range of...

sg range MMA

SERIE SG 5000

Read More

SG 5000 is a series of two-component methacrylate adhesives suitable for bonding of high strength metal, plastic and composites. Offers a unique combination of mixing 1:1 and the ability to adhere to a wide variety of metals. The majority of the...

sg range

SERIE SG 600

Read More

MMA Adhesive with high elongation and high strenght on composite – thermoplastic substrates   Colour: Whitish or Black Tensile strength: 18-21 MPa Shear strength: 19-22 MPa     Working time SG 600-05 Open Time: 4-6 min. /...

sg range

SERIE SG 747

Read More

MMA Adhesive high gapfilling bonding Color: Grey Filling gaps up to 39 mm Tensile strength: 20-28 MPa Shear strength: 12-15 MPa Open time: 35-130 min. Fixture Time: 85-260 min.

sign&display

SG 10

Read More

High-viscosity two-component adhesive and sealing ideal for bonding PVC – Acrylic – ABS – Polycarbonate. Steel – Allumino not anodized.

sign&display

SG 16

Read More

High-sealing adhesive, suitable for very fast bonding: Acrylic – Styrene – Butyrate – Polycarbonate

sign&display

SG 3004

Read More

Acrylic structural adhesive transparent high-strenght with excellent chemical resistance. Open time: 3 minutes Fixture time: 5 minutes Part A Viscosity: 30,000 cps Part B Viscosity: 25,000 cps Colour: Trasparnte Packaging: 50 ml Bi...

sign&display

SG 3346

Read More

Adhesive to use a brush on initiator already applied. Allows you to adjust the open time, with very fast fixture time on the assembly.

sign&display

SG 40

Read More

Two-component adhesive, reactive high-strength Bonding: Acrylic – Acrylic on polyester. Butyrate – PVC – ABS – PETG.

sign&display

SG 42

Read More

Two-component adhesive with mixing ratio of 10:1 Adhesive MIL A-8576C Type III.

sign&display

SG 45

Read More

Two-component structural adhesive with high resistance and viscosity suitable for bonding metals corrosion-resistant and non-prepared, composites and plastics.

sign&display

SG 4707

Read More

Adhesive Low V.O.C. , Medium viscosity, fast setting, bonding of ABS.

sign&display

SG 4784

Read More

Adhesive syrupy medium viscosity, fast and flexible gluing. Suitable for bonding rigid or flexible vinyl or leather, textiles, ABS, acrylic and polyurethane. Weatherproof.

sign&display

SG 4SC

Read More

Adhesive non-flammable, very fast for bonding: Acrylic – Styrene – Polycarbonate – Butyrate

sign&display

SG 55

Read More

Adhesive V.O.C. FREE Two-component slow setting. Urethane-based adhesive bonding: Butyrate – ABS – PETG Excellent resistance to UV rays.

sign&display

SG 58

Read More

Adhesive V.O.C. FREE, two-component, rapid setting. Urethane-based adhesive for bonding: – Butyrate – ABS – PETG Excellent resistance to UV rays