Products by Mastikol

DEGRASANT MK 1001

MK 1001 is a product used as degreasing and adhesion promoter for adhesive based on polyurethane -sylan MK 1001 can be used on substrates before adhesive such as: PUR. MS MK_1001_ENG

Mastikplexx 1000 is a structural two component methacrylate adhesive, designed for the high bonding strength of the metal and composite materials. Bonding metal fasteners for composite molded parts. Bonding aluminum and stainless steel...

MASTIKPLEXX 1050

MASTIKPLEXX 1050 is a structural two components methacrylate adhesive, designed for the high strenght bonding of the metal and composite materials. Bonding metal fasteners for composite molded parts. Bonding aluminum and stainless steel letters,...

MASTIKPLEXX 1100

MASTIKPLEXX 1100 is a structural two components methacrylate adhesive, designed for the high strength bonding of the metal and composite materials. Bonding metal fasteners for composite molded parts. Bonding aluminum and stainless steel letters,...

MASTIKPLEXX 3295

MASTIKPLEXX_3295_ENG

MASTIKPLEXX 4000

MASTIKPLEXX 4000 is two component methacrylate adhesive, structural and designed for low energy plastics bonding with no surface preparation. RECOMMENDED SUBSTRATES: Polypropylene (PP) Polyethylene (PE) Polystyrene (PS) Polyethylene terephthalate...

MK – WIPES

Chemically active high contamination removal wipes approved for automotive and industrial (non domestic) applications. MK-Wipes have been developed for cleaning, pre-treating in surface conditioning applications on range of substrates prior to...

MK 0130

MK 0130 is a single component polyurethane sealant of high viscosity which cures with exposure to moisture air. From this reaction, the product changes from mellow to a state of elastomer with high tensile strength and aging properties. MK 0130 is...

MK 1400 N

Solvent based polychloroprene contact adhesive suitable for bonding leather, wood, metal, rubber.. Higher dry content of the standard solvent based resistant to moisture >90% Resistant temperature: 100 ° C MK_1400N_ENG...

MK 1520 N

Solvent based polyurethane adhesive studied particularly for bonding synthetic materials including: PVC Natural rubber, SBR Texile-nautical Used with the second component Fixdur allows a high hydrolysis resistance and good resistance to heating....

MK 2011

Solvent based adhesive universal MK 2011 polychloroprene contact adhesive with low viscosity for use in spray or brush. Suitable for bonding porous foam, polyurethane foam, leather, textiles and the like. of metal in general, wood, concrete,...

MK 2639

MK 2639 is a single component polyurethane sealant. Polymerizes rapidly on contact with atmospheric moisture. Once cured, the product is highly elastic and can be painted. CONSTRUCTION: sealing joints subject to expansion or not. Sealant joints in...

MK 3353

Adhesive clear with low viscosity, available for bonding a wide range of substrates including roofing systems flat, expanded materials loaded and aluminum. As a result of its excellent oil resistance and suitable for bonding of flexible PVC. Very...

MK 442

MK 442 is a single component polyurethane sealant. Polymerizes rapidly on contact with atmospheric moisture. Once cured, the product is highly elastic and can be painted. CONSTRUCTION: sealing joints subject to expansion or not. Sealant joints in...

MK 7222

MK 7222 is a single component anaerobic product suitable for brake nuts and bolts and other threaded parts against loosening caused by vibration. The product cures spontaneously when confined in the absence of air inside of metal surfaces with...

MK 7243

MK 7243 is a single component product suitable for threaded metal parts against loosening from shock and vibrations. Products cures spontaneously and rapidly when confined in absence of air between close fitting metal surfaces with small gap fill....

MK 7270

MK 7270 is a single component product suitable for threaded metal parts against loosening from shock and vibrations. Products cures spontaneously and rapidly when confined in absence of air between close fitting metal surfaces with small gap fill....

MK 7316

MK 7316 is a anaerobic product single-component suitable for thread sealant and flat parts such as casings, flanges and pump housings. It replaces the conventional gaskets. Especially suitable for chrome, nickel-plated stainless steel. Not suitable...

MK 9810 N

Solvent-free Hot melt adhesive extrudable in hot Temperature. PUR reactive. Suitable for bonding wood, textiles, leather and plastics such as PVC – ABS.. In the automotive market, assembly of components, metal parts, glass, and when you...

MK CA 01

Cyanoacrylate Adhesive high viscosity for bonding porous substrates Viscosity: 1500 cps MK CA 01

MK CA 200

Cyanoacrylate adhesive based, suitable for bonding a wide variety of materials such as wood, paper, cardboard, leather, fabrics, etc.. The time of bonding depends on the substrates, High Temperature resistance : 137 ° C MK CA...

MK CA 20

Cyanoacrylate adhesive for general bonding Very fast fix time MK CA 20 ENG

MK CA 41

Cyanoacrylate Adhesive Universal type with capacity for bonding many substrates such as: Paper Wood Fabrics MK CA 41 ENG

MK CA 46

This cyanoacrylate adhesive is suitable for applications where it is necessary that there are no effects of halos, also has a low odor and does not release fumes. Low Odor. Anti Alone. Viscosity: 50...

MK CA 60

Cyanoacrilate suitable for bonding a wide range of difficult products such as: Plastic Elastomers Withstands temperatures up to 120 ° C Viscosity: 20 cps MK CA 60...

MK EP 500

MK EP 500 is a two parts component low odour and clear with a long open time of 90 min POT LIFE: 120 – 150 minutes FIX TIME : 3 hours MIX RATIO: 1:1 MK EP500 ENG

MK EP 500R

Two component Epoxy adhesive suitable for bonding: Metals Rigid plastics Marble, ceramic, porcelain, models Stones jewelery Glass, ferrite Colour: Transparant Mixing ratio: 1:1 Viscosity: 6000-13000 mPas Open time: 1-2 min. at 20 ° C Setting...

MK EP 600UN

MK EP 600UN is a two parts component epoxy system with a long open time. It’s a viscous adhesive that is usually supplied in bulks packaging and is designed to mix in a ratio of 1-1 by volume through easy hands mixing. Good...

MK HS 301

One component MS polymer adhesive of high quality, high tack and high strength. Particularly suitable for bonding: Corner profiles in aluminum Side panels on buses / trains Metal joints where required a high initial...

MK HS 302 CLEARFIX

Transparent MS polymer adhesive for bonding glass, substitute silicone.

MK HS 302

One component MS polymer adhesive of high quality. Particularly suitable for: Elastic bonding and sealing in eg bus, caravans, trucks and trains Bonding ceilings of buses, trucks and trains Bonding-floor systems ISEGA...

MK HS 303

Single-component adhesive with high quality. Particularly suitable for bonding: Sealing and bonding elastic structures bus, caravan, train and truck. Bonding and sealing roofs Bonding ceilings of trains, buses, trucks....

MK HS 306

High quality single component adhesive for spray application. Particularly suitable for bonding: sealing of joints of sheets welded on horizontal surfaces sealing of junctions and overlapping parts tight sealing of joints...

MK HS 355 FC

MK HS 355 FC is a MS polymer adhesive of high quality developed for the bonding of crystals, glass and windscreen. Very high green strength, is revealed as a very thick paste with a very high resistance to failure. This product...

MK HS 460 FC

High-quality MS polymer adhesive developed for windscreen bonding. High Tensile and fast curing Packaging: 600 ml – Bulks Color: Black Mastikol 460 FC Eng...

MK HS CLEANER

Degreaser cleaner for non-porous surfaces.

MK HS FIRESEALER 335

Flame retardant component adhesive particularly suitable for use in the marine industry, uses: Sealing of expansion joints. Sealing for bulkheads, wall and ceiling coverings. Universal adhesive for metal, concrete, wood, etc.....

MK MSP5

Single-component adhesive with high quality. Particularly suitable for bonding flooring and parquet. MK MSP5

MK PRIMER NP2

Adhesion promoter, primer for non-porous substrates.

MK PRIMER PO5

Adhesion promoter, primer for porous surfaces.

MK SOLVENTE 13 N

Washer and Cleaner to use before and after use solvent MK based adhesive MK_SOLV.13_ENG

MK SOLVENTE NEO

Mixture of solvents for dilution of neoprene adhesives. Packing: Lt.5 MK_SOLV.NEO_ENG

MK SPRAY-BOND

MK SPRAY-BOND is a synthetic spray adhesive, designed for temporary bonding applications. It is a spray adhesive suitable for the positioning of the fabrics in the processing in Pre-preg, resin infusion, RTM. Particularly suitable for positioning...

MK STICK NERO

Operating temperature: 180 ° – 200 ° C Open time: 20-25 seconds Time tack : 5 sec Viscosity: 6000 mPa.s Diameter: 12 mm. MK_STICK_NERO_ENG

MK STICK PLASTIFICATO

Operating temperature: 180 ° – 200 ° C Open time: 20-25 seconds Time tack: 7 sec. Viscosity: 6500 mPa.s Diameter: 12 mm. MK_STICK_PLASTIFICATO_ENG

MK TRASPARENT STICK

Operating temperature: 180 ° – 200 ° C Open time: 20-25 seconds Time tack: 5 sec. Viscosity: 5000 mPa.s Diameter: 12 mm. MK_STICK_TRASPARENTE_ENG

PRIMER MK 2001

Primer MK 2001 is used as an adhesion promoter on the various substrates, including: Aluminum. Plastics. Glass. Color: Black MK_2001_ENG

PU 2KE 230

PU2KE230 is a elastic two-component adhesive based on polyurethane , thixotropic, odorless, black or natural, which cures at room temperature for semi-structural bonding of a wide range of materials such as thermoplastic, steel, aluminum, concrete,...